PRODUCT SPECIFICATION
Modi Lastek 1001
Electrode for preheating metals
GENERAL DESCRIPTION
-
The special coating of this electrode generates a
concentrated heat input in the work piece without
depositing any metals.
-
There is only a little bit of slag that can easily be
removed with a brush.
-
Modi Lastek 1001 can be used for bending and
straightening profiles and plates.
APPLICATIONS
- Locally heating of art and ornamental work.
- Forging small pieces.
-
Dismantling of the steering pivot pin of trucks.
-
Removal of inner ring of a roller bearing jammed on a
shaft. (use Modi Lastek 1000 to cut the outer ring)
- Preheating of a weld that must be peened.
- Heat input per electrode:
- For diam. 4.0mm (5/32”) – approx. 680 kJ
- For diam. 3.2mm (1/8”) – approx. 430 kJ
